CYBEX 625C Owner's Manual page 37

2.
Press to select access Channels menu.
Feature
Signal (ATSC only)
Auto Program
Manual Program (DVB-T only)
Add/Delete Channels
Parental Control
Default Channel
Channel Lock
Channel Memory Override
3.
Press or
4.
Press or
Auto Program (ATSC Monitor)
1.
Press to select Auto Program.
Cybex 625C/625R Cycle Part Number LT-23688-4 F
ATSC Monitor
Settings
Select Air, Cable STD, Cable IRC, or Cable HRC.
See Below
See Below
See Below
Block channels based on TV ratings.
Select channel to display on power up. Select from available
channels or last.
Select Enabled or Disabled. If enabled only one channel is shown,
user cannot change channels.
Select Enabled or Disabled. If enabled allows user to select any
available channel.
to select settings.
to adjust settings.
Page 37 of 80
DVB-T Monitor