Figure 14. Correct Reinstallation Of E-Pac; Figure 15. E-Pac Inserted Over Memory Cards - HP i2000 Hardware Installation

Processor E-PAC

Figure 14. Correct Reinstallation of E-PAC

6. Verify that the memory cards are properly seated into the baseboard assembly.
7. Check that all cables are properly plugged in and not blocking fans or interfering
with fan movement.
8. Verify that the Baseboard E-PAC is in place over the memory cards as shown in
Figure 15. the center tab should align with the E-PAC of the processor assembly. If
necessary position your fingers over the E-PAC as shown in Figure 16 and push
down. The E-PAC should "pop" into place.
E-PAC Channel

Figure 15. E-PAC Inserted over Memory Cards

hp workstation i2000
Baseboard E-PAC
21