Table of Contents
Advertisement
Calling to User-Defined Telephone Number
If the Telephone function enable (refer to the Intercom Configuration / Hardware /
Keypad subsection of Configuration Manual) is selected, you can call the user-defined telephone
number using the 2N
Procedure:
1.
Push
.
2.
You can hear the continuous tone from the loudspeaker.
3.
Enter the telephone number using the numeric keypad and push
confirmation.
4.
You can also hang up the call any time by pushing
enabled; refer to the Intercom Configuration / Hardware / Keypad subsection of
Configuration Manual.
Incoming Call Answer and Reject
If the automatic incoming call answer is disabled (refer to the Intercom Configuration /
Services / Phone / Calls subsection of Configuration Manual), a call coming to
®
2N
IP Vario is signalled with loud ringing. Push
Code Door Opening (Switch Activation)
®
2N
IP Vario is equipped with a door unlocking switch. To activate the switch enter the valid
code (refer to the Intercom Configuration / Hardware / Switches subsection of Configuration
Manual) on the numeric keypad.
Procedure:
•
Enter the lock 1 or lock 2 activating code using the numeric keypad and push
•
A valid code is signalled by a continuous switch activation (lock opening) signalling tone.
An invalid code is announced by acoustic signalling
Profile Activation and Deactivation
You can activate or deactivate a profile and define call routing to the telephone numbers
assigned to the profile using the numeric keypad. For more details refer to the Intercom
Configuration / Directory / Time Profiles subsection of Configuration Manual subsection.
Procedure:
•
Enter the profile activation or deactivation code using the numeric keypad and push
for confirmation.
®
IP Vario numeric keypad.
Installation manual 2N® IP Vario
if the Hang-up by # button is
to answer and
to reject the call.
.
again for
.
95 / 113
Advertisement
Table of Contents
