•
Configuration Connector Connection
•
Display Connector
•
Card Reader Connection
•
Grounding
•
Available switches
®
2N
IP Vario is designed for connection in the Ethernet computer network (10/100BASE-T) using
a UTP cable. Use a CAT 5e UTP cable at least for connection.
Caution
•
The device must be part of the electrical system of the building.
®
2N
IP Vario is fed through the PoE (Power over Ethernet) technology. No additional cabling is
therefore necessary. If your Ethernet is not equipped with the PoE technology, it is possible to
use a PoE injector, Part No. 91378100. As an alternative, you can use a power adapter, Part No.
®
91341481E. 2N
IP Vario is configured over an integrated administration web server, which can
be controlled from any web browser, e.g., Mozilla Firefox.
Tip
•
Video Tutorial:
Sorry, the widget is not supported in this export.
But you can reach it using the following URL:
https://www.youtube.com/watch?
v=1TNIPq9A_QI&list=UUL4rQtjCnq3cT5-A9N0Xr4Q
Door communication system 2N® IP Vario – Electrical
Installation manual 2N® IP Vario
Installation.
49 / 113