•
3-buttons models: Press the second quick dial button on the basic unit five times.
•
6-buttons models: Press the fifth quick dial button on the basic unit five times.
®
•
2N
IP Vario will read its IP address.
•
If the address is 0.0.0.0, it means that the intercom has not obtained the IP address from
the DHCP server.
Note
•
Be sure to press the button sequence within thirty seconds after the sound signal
for security reasons. Up to 2 s intervals are allowed between the presses.
Installation manual 2N® IP Vario
90 / 113