Table of Contents
Advertisement
Installation manual 2N® IP Vario
Description of Printed Circuit Board Connectors
In figure bellow you can see the location of the printed circuit board (PCB) connectors.
Connectors to which the accessories can be connected and connectors that serve for
®
configuring 2N
IP Vario are indicated on the board. The UTP cable for the Ethernet connection
is to be connected to the terminal block X2 as shown in table below. The terminal block can be
removed from the PCB. The connection of each of the connectors is described in the subsections
below.
Description of Connectors, PCB Version 530v2
50 / 113
Advertisement
Table of Contents
