Adjusting A Paper Drawer To Hold A Different Paper Size - Canon imageRUNNER C5051 ADVANCE Maintenance Manual

Adjusting a Paper Drawer to Hold a Different Paper Size

If you want to load a different paper size into a paper drawer, follow the procedure described below to adjust the paper
drawer guides.
Only A4 transparencies can be used. Make sure that the left guide is set to 'A4' when loading transparencies in a paper drawer. If
transparencies of a different size (other than A4) are loaded in a paper drawer, the paper size and remaining amount of paper will not be
1
detected correctly.
1
Press and release the button on the paper drawer that you want to adjust . Grip the handle, and
pull out the paper drawer until it stops . Remove all of the remaining paper .
2
Slide the left guide to align it with the mark for the desired paper size .
Slide the guide until it clicks.
When loading 305 mm x 457 mm paper in the paper drawer, slide the left guide to align it with the mark on the front left side of
the paper drawer.
1-6
Paper Drawers
Left Guide