Adjusting A Paper Drawer To Hold A Different Paper Size - Canon IMAGERUNNER 5075 Reference Manual

Adjusting a Paper Drawer to Hold a Different Paper Size

If you want to load a different paper size into Paper Drawer 3 or 4, follow the
procedure described below to adjust the paper drawer guides.
NOTE
•
You can adjust the paper drawers to hold the following standard paper sizes: 11" x 17",
LGL, LTR, LTRR, or STMTR.
•
Only the paper sizes of Paper Drawer 3 and 4 can be changed.
7
1
7-8
Paper Drawers
IMPORTANT
You will not be able to make copies or print if you load paper that exceeds the
loading limit, or if the paper drawer is not completely pushed into the machine.
Always check that the paper drawers are in place, and that the paper does not
exceed the loading limit.
NOTE
If paper runs out during copying or printing, load a new paper stack, and follow the
instructions on the touch panel display. The machine automatically restarts, and
produces the remaining copies or prints.
Press and release the button on the paper drawer that you
want to adjust. Grip the handle, and pull out the paper drawer
until it stops. Remove all of the remaining paper.