Fan Connectors; Power Connectors; Front Panel Block, Power Led, Ir, And Speaker Connector - FIC KT-400A Manual

KT-400A /KT-600 Dynasty Mainboard Manual

Fan Connectors

The two connectors, CPU_FAN, SYSTEM_FAN are linked to the CPU fan,
case fan, respectively.

Power Connectors

The 20-pin male block connector is connected to the ATX power supply. The
4-pin male block connector is for the ATX_12V power use. All two connectors
are linked with your ATX power supply. The plug from the power supply will
only insert in one orientation because of the different hole sizes. Find the
proper orientation and push down firmly making sure that the pins are aligned.

Front Panel Block, Power LED, IR, and Speaker Connector

This block connector includes the connectors for linking with Power LED (3-
pin), HDD LED, power button, power/sleep/message waiting button, reset
buttonon the front panel of the system case. Please identify polarities of plug
wires for the case speaker and LEDs. Please ask vendor about this information
when you buy them and install the system by yourself. The plug wires (next
page) polarities of these buttons will not affect the function.
2 - 10