Install Memory Modules; Install The Cpu - FIC KT-400A Manual

KT-400A /KT-600 Dynasty Mainboard Manual

2). Install Memory Modules

1. Locate DDR DIMM sockets
on the mainboard.
NOTE:
If you use PC3200 DDR DIMM, only DIMM1 and DIMM2 sockets are
allowed.
2. Install DDR DIMM straight down
into the socket 1 using both hands,
then socket 2, and so forth.
3. The clip on both ends of the
socket will close up to hold the
DDR DIMM in place when the DDR
DIMM reaches the socket bottom.

3). Install the CPU

The mainboard has built-in Switching Voltage Regulator to support CPU Vcore
autodetection. That is, it has the ability to detect and recognize the CPU volt-
age, clock, ratio. Users can view the report about CPU frequency through
Frequency / Voltage Control of the BIOS Setup Screen.
2 - 4