FIC KT-400A Manual page 44

AC Loss Auto Restart
When the system is shut down owing to the power failure, the system will
not be back to power on by itself. This feature allows you to set the
system back to which power status of the system when the system power
is resumed. It always will be back to on if set at On. The system always be
back to off if set at Off. The options are Auto, On, Off.
IRQ/Event Activity Detect
PS2KB Wakeup Select
This item allows you to select Hot Key or Password to wake-up the system
by PS2 Keyboard. When select Password, please press ENTER key to
change password max 8 numbers. The options are : Hot key, Password.
PS2KB Wakeup from S1-S3
It allows you to set a Hot Key to wake-up the system by PS2 Keyboard.
The options are: Disable, Ctrl+F1,..., Ctrl+F12, Power, Wake, Any key.
Power and Wake are Windows98 Keyboard button.
PS2MS Wakeup from S1-S3
This item allows you to wake-up the system by PS2 Mouse.
The options are: Enabled, Disabled.
USB Resume from S1-S3
This item allows you to wake-up the system by USB device when you save
the computer power at S1-S3. The options are: Enabled, Disabled.
VGA
When set at On, any VGA activity will aThe options are: wake the system.
The options are: OFF, ON.
LPT & COM
When LPT/COM is selected, any access of LPT and COM ports will awake
the system. Likewise, either LPT or COM is chosen, the system will be
awaken by any activity of LPT or COM port.
The options are: LPT/COM, LPT, COM, NONE.
BIOS Setup
3 - 17