FIC KT-400A Manual page 36

DRAM CAS Latency
If the CAS latency of your installed memory medule is 2 Cycle, The selec-
tion 2 will enhance system performance. The options are: 1.5, 2, 2.5, 3.
Bank Interleave
This item allows users to select the bank interleave function of DRAM,
when the feature DRAM Timing By SPD set at Disabled.
The options are: Disabled, 2 Bank, 4 Bank.
Precharge to Active (Trp)
This item allows users to set the clock time from Precharge to Active com-
mand. The options are: 2T, 3T, 4T, 5T.
Active to Precharge (Tras)
This item allows users to set the clock time from Active to Precharge com-
mand. The options are: 6T, 7T, 8T, 9T.
Active to CMD (Trcd)
This item allows users to set the clock time from Active to Read/Write
Delay command. The options are: 2T, 3T, 4T, 5T.
DRAM Burst Length
This item allows users to set DRAM burst length.
The options are: 4, 8.
DRAM Command Rate
This item allows users to set Address Time After command.
The options are: 2T Command, l T Command.
Write Recovery Time
This item allows users to set write recovery time.
The options are: 2T, 3T.
tWTR
This item allows users to set DRAM tWTR timing control.
The options are: 2T, 1T.
BIOS Setup
3 - 9