FIC KT-400A Manual page 40

Secondary Master/Slave UDMA
Allows an automatic configuration of the PCI secondary IDE hard drive
(master/slave) mode if Ultra DMA is supported both on the motherboard
and the hard disk. The options are: Auto, Disabled.
IDE HDD Block Mode
Block mode is also called block transfer, multiple commands, or multiple
sector read/write. If your IDE hard drive supports block mode (most new
drives do), select Enabled for automatic detection of the optimal number of
block read/writes per sector the drive can support.
The options are: Enabled, Disabled.
VIA OnChip PCI Device
Onboard 1394 Support
It allows users to disable the onboard 1394 feature.
The options are: Enabled, Disabled.
VIA-3058 AC97 Audio
It allows users to disable AC97 audio function in South Bridge.
The options are: Auto, Disabled.
VIA Onchip LAN
It allows users to disable onboard LAN feature.
The options are: Enabled, Disabled.
Onboard Lan Boot ROM
Enables and disables the onboard LAN Boot ROM.
The options are: Enabled, Disabled.
OnChip USB Controller
Disable this option if you are not using the onboard USB 1.1 and USB 2.0
feature. The options are: Disabled, Enabled.
OnChip USB2.0 Controller
It allows users to disable the onboard USB2.0 Enhanced Host Controller
Interface (EHCI) function. The options are: Enabled, Disabled.
BIOS Setup
3 - 13