Spdif_Out Connector; Serial Ata Connectors (Kt-600 Pro Only) - FIC KT-400A Manual

KT-400A /KT-600 Dynasty Mainboard Manual
IR is a pinheader that is used for linking with your ID device to allow transmis-
sion of data to another system that also supports the IR feature.
Speaker is connected with the case speaker.

SPDIF_OUT Connector

It is used for audio output that with
SPDIF spec.
Pin definitions: Pin1 is 5V, Pin2 is
SPDIF_OUT signal, P3 is GND.

Serial ATA Connectors (KT-600 Pro only)

The 2 SATA connectors provide you with the connections to serial ATA de-
vices that confirm to the Serial ATA specification. Serial ATA supports all ATA
and ATAPI devices. The figures below left are two SATA cables (the top one is
for power; the next one is for data). The data cable pin assignments of SATA
connector.
NOTE: Please read BIOS Setup, Integrated Peripherals, the fea-
tures about SATA setting, for more information about the usage of
the feature.
2 - 12