Table of Contents
Advertisement
KT-400A /KT-600 Dynasty Mainboard Manual
1. Select an available expansion slot.
2. Remove the corresponding slot cover from the computer chassis. Un-
screw the mounting screw that secures the slot cover and pull the slot cover
out from the computer chassis. Keep the slot cover mounting screw nearby.
3. Push the card firmly into the slot.
Push down on one end of the expan-
sion card, then the other. Use this rock-
ing motion until them card is firmly
seated inside the expansion slot. Se-
cure the card with the screw removed
in Step 2.
2 - 8
Advertisement
Table of Contents
