FIC KT-400A Manual page 34

BIOS Guardian and Reflash BIOS
BIOS Guardian by default is enabled, thus effectively acts as a fire-
wall against viruses that can attack the BIOS while the system is
running. It must be disabled before reflash BIOS.
The steps below show you how to off and on BIOS Guardian when
reflash BIOS:
1. Press Del key while booting. Go to CMOS Setup Utility menu.
2. Go to Advanced BIOS Features submenu.
3. Set the feature BIOS Guardian at Disabled.
4. Save the setting and exit. The system restarts.
5. POST screen holds. A message about BIOS Guardian shows.
6. Press Space bar.
7. Reflash BIOS. Restart the system after complete it.
8. POST screen holds. A message about BIOS Guardian shows.
9. Press G key. The feature BIOS Guardian will be enabled again.
Full Screen LOGO Show
It decides whether or not the full screen logo is shown during system
booting up. The options are: Enabled, Disabled.
NOTE:
1. LogoGenie supports Award BIOS only.
2. If you create a Logo file (.bmp) by LogoGenie, the file size must
||||be 640 x 464 x 256 colors.
BIOS Setup
3 - 7