FIC KT-400A Manual page 37

KT-400A /KT-600 Dynasty Mainboard Manual
AGP & P2P Bridge Control
AGP Aperture Size
It allows you to select the main memory frame size for AGP use.
The options list presents all provided possibilities.
AGP Mode
This feature allows users to select the AGP mode when an AGP add-on
card installed. The options are: 4X, 2X, 1X.
AGP Driving Control / AGP Driving Value
These two features allow user to improve the performance of AGP card
manually by pressing Page Down/Page UP key if necessary.
The options of AGP Driving Control are: Auto, Manual.
AGP Fast Write
This feature allows you to set AGP fast write mode.
The options are: Disabled, Enabled.
AGP Master 1 WS Write
When enabled, the AGP bus master write access to DRAMs will add one
wait-state cycle. The options are: Enabled, Disabled.
AGP Master 1 WS Read
When enabled, the AGP bus master read access to the DRAMs will add one
wait-state cycle. The options are: Disabled, Enabled.
AGP 3.0 Calibration cycle
This feature allows users to enable or disable AGP 3.0cablibration cycle.
The options are: Disabled, Enabled.
3 - 10