FIC KT-400A Manual page 47

KT-400A /KT-600 Dynasty Mainboard Manual
Reset Configuration Data
Enabling it to reset the system Extended System Configuration Data (ESCD)
when you exit Setup if you have installed a new add-on card and the
system reconfiguration has caused such a serious conflict that the operat-
ing system can not boot. The options are: Disabled, Enabled.
Resources Controlled By
If set at Auto, the BIOS arranges all system resources. If there exists con-
flict, select Manual. The options are: Auto (ESCD), Manual.
The manual options of IRQ- / DMA- assigned to are: PCI/ISA PnP, Legacy
ISA.
PCI/VGA Palette Snoop
Set this feature to be enabled if any ISA adapter card installed in the system
requires the VGA palette snoop function.
The options are: Disabled, Enabled.
Assign IRQ For VGA
If your PCI VGA card devices do not need an IRQ, select Disabled; there-
fore, an IRQ can be released for the system use.
The options are: Enabled, Disabled.
Assign IRQ For USB
If your USB devices do not need an IRQ, select Disabled; therefore, an IRQ
can be released for the system use.
The options are: Enabled, Disabled.
3 - 20