5). Connect Devices
Floppy Diskette Drive Connector
This connector provides the connection with your floppy disk drive.
Insert the floppy ribbon cable
(below) onto the floppy connector.
The colored stripe (indicated by the
arrow head, right) of the ribbon cable
must be the same side with the Pin 1.
IDE Device Connectors
The two connectors, PRIMARY
and SECONDARY, are used for
your IDE hard disk drives, CD drives,
LS-120|drives, or IDE ZIP drives.
Insert the floppy ribbon cable
(below) onto the floppy connector.
The colored stripe (indicated by the
arrow head, right) of the ribbon cable
must be the same side with the Pin 1.
Installation Procedures
2 - 9