Table of Contents
Advertisement
PA-2010 Mainboard Manual
5). Connect Cables and Power Supply
Serial Port Connector: COM1 and COM2
These two 9-pin D-Sub male connectors allow you to connect with your devices
that take serial ports, such as a serial mouse or a modem. The COM2 Port on the
PA-2010 mainboard can also be used as another IR Port. Usually, your serial
mouse is attached to COM1. Your modem is linked to COM2. When you do not
use the modem, you can set the BIOS to let COM2 be an IR port to save a
dedicated SIR port.
CPU Fan Connector: FAN
This connector is linked to the CPU fan.
36
Advertisement
Table of Contents
