Connect Atx Power - FIC KT-400A Manual

KT-400A /KT-600 Dynasty Mainboard Manual
Affix the CPU by pressing the lever downward
and locking it beside the socket.
3. Place the fan with heatsink on the CPU top
and press down two plastic clips to hook up
with the holes on the retention module on two
sides.
4. Press down the white bar on each clip to
fasten the fan set on the retention module.

Connect ATX Power

The 20-hole power plug (top right) is connected
to the ATX power 20-pin pinheaders. The 4-hole
12V power plug (bottom right) is inserted in the
ATX_12V power connector.
The plug from the power supply will only insert
in one orientation because of the different hole
sizes. Find the proper orientation and push down
firmly making sure that the pins are aligned.
2 - 6