FIC KT-400A Manual page 45

KT-400A /KT-600 Dynasty Mainboard Manual
HDD & FDD
When it is set at ON, any access happened at hard drives and floppy drives
will awake the system. The options are: OFF, ON.
PCI Master
To set this feature at ON activates that Power Management feautre (PM)
wake-up event for the PCI bus master card. The options are: OFF, ON.
PowerOn by PCI Card
When set at Enabled, any PCI-PM event awakes the system from a PCI-PM
controlled state. The options are Disabled, Enabled.
Wake Up On LAN/Ring
When set at Enabled, an input signal comes from the other client/server on
the LAN/ring awakes the system from a soft off state if connected over
LAN/modem. The options are Disabled or Enabled.
RTC Alarm Resume
Enabled allows you to set the time the system will be turned on from the
system power-off status. The options are: Enabled, Disabled.
Date (of Month)
This feature allows you to set the day of the alarm starts when the RTC
Alarm Resume From Soft Off is set to be Enabled. The options are: 0, 1..31.
Resume Time (hh:mm:ss)
If an ATX power supply is installed and when RTC Alarm Resume is Enabled,
this feature allows you to set the time of the alarm starts when the RTC
Alarm Resume From Soft Off is set to be Enabled.
The options are: hh (hour) - 0, 1, 2,.., 23; mm (minute) - 0, 1, 2,..,59; ss
(second) - 0, 1, 2,..,59.
Primary INTR
If set at ON, the Primary interrupt (the Primary option in the feature of IRQ#
Acitivity) will make the power management wake up the system.
The options are: ON, OFF.
3 - 18