Table of Contents
Advertisement
After turning off the printer, always wait at least four seconds before turning it back on again.
Never unplug the printer or turn off a power strip to which the printer is attached when the
printer's power is turned on. This may prevent the print head unit from returning to the
home position. Once in the home position, the print head unit and the ink cartridges are
capped, which prevents them from damage or drying out. This is critical. If left uncapped,
the print head unit may clog and may need to be replaced.
Loading a Stack of Paper
These steps show how to load a stack of plain paper and test your printer. In the next chapter, you'll learn
how to print on different types of print media.
You can stack about 100 sheets of plain paper in the sheet feeder.
1. Make sure the paper selection lever is set to the back position.
1 of 1
Setting Up the Printer 30
4/15/98 11:41 AM
Advertisement
Table of Contents
