Thorough cleaning
The printer performs a through cleaning of all the print head nozzles when you follow these steps:
1. Make sure the printer is turned on.
2. Press the PRINT MODE and ENVELOPE Buttons at the same time.
Hold these button until the printer beeps and the INK and envelope lights flash.
3. Press the PRINT MODE button until all lights are flashing (six times)
4. To start the thorough print head cleaning procedure, press the envelope button until the printer
beeps.
When the print head cleaning procedure is complete, the indicator lights stop flashing.
To cancel the print head cleaning selection process, press the PRINT MODE button until all
lights are off. Then press the envelope button.
1 of 1
Maintaining the Printer 130
4/15/98 1:55 PM