Loading Photo Paper / Plain Paper In Rear Tray - Canon GX5500 Series Online Manual

Hide thumbs Also See for GX5500 Series:
Table of Contents

Advertisement

Loading Photo Paper / Plain Paper in Rear Tray

You can load photo paper or plain paper.
You can also load envelopes on the rear tray.
Loading Envelopes, Medicine Envelopes, and Delivery Slips in Rear Tray
1.
1. Prepare paper.
Align the edges of paper. If paper is curled, flatten it.
Note
• Align the edges of paper neatly before loading. Loading paper without aligning the edges may
cause paper jams.
• If paper is curled, hold the curled corners and gently bend them in the opposite direction until the
paper becomes completely flat.
For details on how to flatten curled paper, see
Scratched/Ink Blots/Paper
• When using Photo Paper Plus Semi-gloss SG-201, even if the sheet is curled, load one sheet at
a time as it is. If you roll up this paper to flatten, this may cause cracks on the surface of the paper
and reduce the print quality.
• Do not use paper which is cut to be smaller than B6 Half-sized paper. This may cause jams.
2. Open the rear tray cover (A) and then pull up the paper support (B).
2.
Check3
Curl.
60
in
Paper Is Smudged/Printed Surface Is

Advertisement

Table of Contents
loading

Table of Contents