Table of Contents
Advertisement
Loading Photo Paper / Plain Paper in Rear Tray
You can load photo paper or plain paper.
You can also load envelopes on the rear tray.
Loading Envelopes in Rear Tray
1.
1. Prepare paper.
Align the edges of paper. If paper is curled, flatten it.
Note
•
• Align the edges of paper neatly before loading. Loading paper without aligning the edges may
cause paper jams.
•
• If paper is curled, hold the curled corners and gently bend them in the opposite direction until the
paper becomes completely flat.
For more details on handling curled paper, see
Scratched/Ink Blots/Paper
•
• When using Photo Paper Plus Semi-gloss SG-201, even if the sheet is curled, load one sheet at
a time as it is. If you roll up this paper to flatten, this may cause cracks on the surface of the paper
and reduce the print quality.
2. Open the rear tray cover (A) and then pull up the paper support (B).
2.
3. Slide right paper guide (C) to open both paper guides.
3.
Check 3
Curl.
61
in
Paper Is Smudged/Printed Surface Is
Advertisement
Table of Contents
