Table of Contents
Advertisement
Once your software and driver are ready to print, you can set up the printer for automatic feed or manual
feed. Both methods are described earlier in this chapter.
Follow these guidelines when automatically feeding stacks of special paper:
When automatically feeding transparencies or back print film, remove each sheet after it is
delivered. Do not allow the film sheets to stack up in the paper output tray.
Place at least one sheet of plain paper in back of a stack of transparencies or back print film to
avoid paper jams and misfeeds.
Let the printed sheets of film dry completely before storing them. The complete drying time
required for color printing on Canon's transparencies or back print film is approximately 15
minutes. The complete drying time required for solid black printing on this media is approximately
30 minutes.
You may be able to reduce the drying time if you reduce the density setting in your application
before printing.
If printing at 720x720 dpi in black on back print film appears blurred, switch to 360x360 dpi or
reduce the density setting in your application.
If printing in black on transparencies is not as crisp as you expected, reduce the density setting in
your application.
When a sheet of film has dried completely, cover its printed side with a sheet of plain (not coated)
paper before storing it; this is recommended even if you place the sheets of film in a clear file.
When printing on glossy paper, refer to the instructions provided with the paper.
For best results when printing on special papers, follow the instructions that came with
the paper.
1 of 1
Paper Handling 105
4/15/98 1:47 PM
Advertisement
Table of Contents
