Table of Contents
Advertisement
Output is not as
expected
Extra characters appear
on the page
Printer driver may not be
correct.
Print Manger may be causing
problems.
5. Click on Connect.
6. Click on the box next to Fast Printing
Direct to Port to Remove the X.
7. Click on OK.
8. Click on Close.
9. Close the Control Panel.
10. Try your print operation again
If problem persists, go back to step 5 (above)
and change the connection from LPT1 to
LPT1.DOS.
Make sure you have selected the Canon
BJC-610 setting in the Printers dialog box or
from the printer setting for your particular
application.
For your Media Type, try Coated Paper
rather than Plain Paper.
Disable the Print Manager.
If the image prints correctly with the Print
Manager disabled, but you want to use the
Print Manager to print in Microsoft
Windows, try the following:
1. Minimize all the current Microsoft
Windows applications, including the
Program Manager.
2. Click on Print Manager, a dialog box
appears.
3. Select Close.
4. Double-click on the Program Manager.
5. Select the Window option from the
Program Manager's menu bar.
6. Select the Main group from the
Program Manager.
7. Double-click on the Control Panel.
8. Double-click on the Printers Icon.
9. Click on the box next to the Use Print
Manager to add an X. This turns on the
Program Manager.
10. Select the Canon BJC-610.
11. Select Connect.
12. Change the Timeouts value in Device
Not Selected from 15 to 30 seconds.
13. Change the Timeouts value in
Transmission Retry from 45 to 90
seconds.
Advertisement
Table of Contents
