Table of Contents
Advertisement
Printing the Test Patterns
Using the operator panel, there are two test patterns you can generate to check the operation of the
printer:
Color pattern verifies color and font generation
Font pattern verifies font generation and print style
To print the test patterns, you must be automatically feeding paper. Make sure the paper selection lever is
set to the back.
Use letter-size or A4-size paper when printing the test patterns. If you attempt to print on a
smaller sheet, ink will get on the platen. If this happens, see Chapter 6, Maintaining the
Printer, for a description of how to clean the platen.
Color Pattern
Starting
To start the color pattern, follow these steps:
1. Turn off the printer.
2. Make sure paper is loaded.
3. Press and hold the FF button, and press the POWER button until the printer beeps.
1 of 1
Using the Printer With MS-DOS 22
4/15/98 2:18 PM
Advertisement
Table of Contents
