Table of Contents
Advertisement
Always use the three-wire, grounded power receptacle (electrical wall outlet with three holes) for
your printer's power cord. Do not modify the cord or remove the ground pin.
Make sure the power is off any time you connect or disconnect the power cord or interface cable.
Do not move the mechanism that holds the print head unit and ink cartridges. Attempting to move
the holder may damage delicate mechanical parts.
Do not touch the print head nozzles on the prin head unit. Ink may leak out and cause stains. Also,
you may permanently damage your print head unit, which would require you to purchase a
replacement.
Do not touch the white padding inside the ink cartridge. Ink may leak out and you may damage the
cartridge.
Maintaining the Printer 126
1 of 1
4/15/98 1:54 PM
Advertisement
Table of Contents
