Download
Share
Print this page
Canon BJC-6000 Series Setup Instructions
  1. Manuals
  2. Brands
  3. Canon Manuals
  4. Printer
  5. BJC-6000 Series
  6. Setup instructions
Canon BJC-6000 Series Setup Instructions

Canon BJC-6000 Series Setup Instructions

Canon bjc-6000: setup instruction
Hide thumbs Also See for BJC-6000 Series:

Advertisement

Quick Links

Download this manual See also: Service Manual, User Manual
BJC-6000 Series Setup Instructions
Step 1: Remove All Shipping Tape and Protective Materials
Note that tape may not be in the exact locations shown here.
Remove all tape and material from the front, back, and inside of the printer.
Make sure you have these items:
BC-31 Color BJ Cartridge
BC-30 Black BJ Cartridge
Documentation kit (User's Manual, Warranty Card, Registration Card)
Canon Creative Pro CD packet
Printer cable (not included)
Check the outside of your box for other contents.
Important! Save the box and shipping materials. You may need them later if you have to transport the
printer.
Step 2: Select a Location for the Printer
Choose a flat sturdy surface with enough space around the printer to store and feed paper.
Avoid placing the printer in direct sunlight.
Fully extend the paper support and paper output tray to ensure enough space is available for proper
operation.
Make sure you have enough room to manually feed single sheets of paper from the back of the printer
Always lift the printer by gripping both sides.

Advertisement

loading

Related Manuals for Canon BJC-6000 Series

Summary of Contents for Canon BJC-6000 Series

  • Page 1 Fully extend the paper support and paper output tray to ensure enough space is available for proper operation. Make sure you have enough room to manually feed single sheets of paper from the back of the printer Always lift the printer by gripping both sides.
  • Page 2 You can plug the power cord from the printer into either a wall outlet or a power surge protector. Important! Never turn off the printer using a power strip. 2. Turn on the printer. Press the POWER button to turn on the printer. The printer beeps once and the POWER light starts to flash.
  • Page 3 1. Lower the paper output tray and lift up the front cover. The cartridge holder moves to the center of the printer. 2. Remove the shipping material and tape from the cartridge holder. Remove the protective cover.
  • Page 4 4. Remove the BC-31 Color BJ Cartridge from its box. Remove the orange protective cap from the print head, and then remove the orange tape. Do not attempt to replace the cap on a BJ cartridge. 5. Insert the BJ cartridge. Set the BC-31 Color BJ cartridge into the right slot of the cartridge holder.
  • Page 5 7. Insert the Ink Tank. Insert the BCI-3Y (Yellow) Ink Tank into the first slot on the right side of the BJ cartridge. Gently press down on the top of the Ink Tank until it locks into place. 8. Insert the other Ink Tanks. Repeat steps 6 and 7 for the BCI-3M (Magenta) and BCI-3C (Cyan) Ink Tanks.
  • Page 6 Step 6: Install The BC-30 Black BJ Cartridge 1. Raise the blue lock lever on the left side of the cartridge holder. 2. Remove the BC-30 Black BJ Cartridge from its box. Remove the orange protective cap from the print head, and then remove the orange tape. Do not attempt to replace the cap on a BJ cartridge.
  • Page 7 3. Insert the BJ cartridge. Set the BC-30 Black BJ cartridge into the left slot of the cartridge holder. Lower the blue lock lever on the left side of the holder until it locks into place. Remove the protective tank from inside the BJ cartridge. 4.
  • Page 8 Gently press down on the top of the Ink Tank until it locks into place. 6. Close the front cover. After you close the front cover, you will hear the cartridge holder return to the home position. The printer automatically cleans the print heads.
  • Page 9 Step 7: Load Paper 1. Pull up the paper support; then lower the paper output tray and pull it all the way out. Move the paper guide to the left to match the width of your paper. 2. Fan a stack of paper and slide it into the sheet feeder until it stops. Adjust the paper guide snug to the edge of the stack.

  • Page 10: Step 8: Install The Printer Driver

    Important! You must install the BJC-6000 Series Printer Driver for Windows. The printer driver controls the communication between the printer and your computer. Installing your printer driver is easy. Use the Canon Creative Pro CD-ROM and follow these simple bjc6000steps for one of the following operating systems: Printer Setup for Windows 98/ Windows 95/ NT 4.0...