Table of Contents
Advertisement
Most software programs automatically send control codes and ESCape sequences to the printer.
However, some applications may require you to supply the commands. How you enter the control codes
and ESCape sequences depend on your software program. Your software program may require you to
enter the codes and sequences in a specific format, such as decimal rather than hexadecimal. For example,
you can use only decimal format with MultiMate Advantage II™, Professional Write™, and PFS: First
Choice™.
Software program printer drivers may override the printer control codes embedded in a
document. This means the command will not take effect because of the way the application
handled it.
To determine if an application is overriding your commands, print the document using a
generic driver and see if the correct commands are reflected in the printed copy. If they are,
the application printer driver is overriding the commands.
If you would like to receive a list of the control codes and ESCape sequences the printer recognizes, you
can use Canon's toll-free fax retrieval system to request the BJC-610 Printer Command Summary. Call
1-800-526-4345 for details.
1 of 1
Using the Printer With MS-DOS 214
4/15/98 2:13 PM
Advertisement
Table of Contents
