Table of Contents
Advertisement
Font Pattern
You can print the font pattern in both printer control modes: Epson LQ mode or BJ-10 mode. The printer
prints all characters in the available print styles and pitches.
Starting
To start the font pattern, follow these steps:
1. Turn off the printer.
2. Make sure paper is loaded.
3. Press and hold the PRINT MODE button, and press the POWER button until the beeps.
4. When the POWER light starts to flash, release both buttons.
When the POWER light stops flashing, the printer starts to print the font pattern.
1 of 1
Using the Printer With MS-DOS
4/15/98 2:18 PM
Advertisement
Table of Contents
