Attaching the Power Cord
To attach the power cord, follow the steps below:
1.
Attach the power cord to the AC power receptacle on the back of the printer.
2. Plug the power cord into a properly grounded AC outlet.
1 of 1
Use a power supply that is the appropriate voltage and frequency: AC 120 V, 60 Hz
0.5A. This is standard for an electrical outlet in the United States or Canada. Canon
does not recommend using the printer with any other power source or with a
transformer.
Use only the power cord that came with the printer. Using a longer cord or an
extension cord may result in reduce voltage or malfunctions.
If you smell a peculiar odor or see smoke, unplug the power cord immediately.
Do not place anything in front of your wall outlet that may obstruct your access to it or
put pressure on the power cord.
When unplugging the power cord, always remove it by holding the plug and not the
cord.
Do not unplug the printer unnecessarily. The printer may clean the print head nozzles
and consume a small amount of ink when you plug it into an AC outlet or a power
strip.
Setting Up the Printer 18
4/15/98 11:19 AM