Table of Contents
Advertisement
The test page is also useful for verifying that the print head nozzles are operating properly. If they are
not, you need to clean them; see page 128.
After you have restarted Microsoft Windows, you can remove the diskette.
Optimizing Print Quality
When you first set up the printer, you may want to align the print head unit. The print head unit has been
aligned at the factory. However, to be sure of the best print quality ( optimum horizontal dot alignment) ,
it's a good idea to align the print head unit.
After installing the Microsoft Windows Printing System, you can perform the above operation from its
Printer Options dialog box. See Chapter 3, Using the Microsoft Windows Printing System, for details.
1 of 2
4/15/98 11:51 AM
Advertisement
Table of Contents
