Error Messages - Canon Color imageCLASS MF8450c Basic Operation Manual

Error Messages

When a message appears on the display, please refer to the examples of error messages in
the table below.
Message
Avail. Mem.
Cannot find server.
Cannot use this function at this
time.
Check TCP/IP.
Check that all of the covers are
closed.
Description
This message shows the percentage
of the memory currently available.
This message is displayed when
you set the originals in the feeder in
Fax/Send mode.
The IP address that the machine
should connect to cannot be
determined.
– You have specified the group
addresses when the line is off the
hook.
– You have specified the One-touch
that has registered with other than
fax number when the line is off
the hook.
– The registered group is
already nested for three levels
of subgroups (e.g., a group
registered in a group in a group in
a group).
– You selected the One-touch that
has already been registered,
when you are registering group
addresses.
– You selected group addresses that
has already been registered, when
you are registering a One-touch.
The machine's TCP/IP is not
operating.
The cover is open.
Action
If you need more space, wait for the
machine to send any documents in
memory. Also print, send, or delete any
documents stored in memory.
Check the DNS (Domain Name
System) Server Settings in TCP/IPv4
or v6 in Network Settings in System
Management Set (from the Additional
Functions screen).
– Specify the recipient other than group
addresses.
– Make sure that the line is
disconnected.
– You cannot register a group to contain
more than three levels of subgroups.
Modify the group so that it contains
three levels of groups or less.
– Register the One-touch that is not
used.
Check the IP Address Settings in Network
Settings in System Management Set
(from the Additional Functions screen).
(See "Network Settings," in the e-
Manual.)
Check the cover and make sure that it is
completely closed.
Error Messages
12-25