Canon Color imageCLASS MF8450c Basic Operation Manual page 387

Basic Scanning Operations
6
Make the scan settings you require.
You can specify the following settings:
<Color/File Format Settings>: Specifies the
–
color type of originals and the file format for
sending. (See "Scan, " in the e-Manual.)
– <Resolution Settings>: Adjusts the resolution
of originals. (See "Scan, " in the e-Manual.)
– <Density/Background Rem. Set.>: Adjusts the
density and the background color of originals.
(See "Scan, " in the e-Manual.)
– <Original Image Quality Settings>: Adjusts the
image quality of originals. (See "Scan, " in the e-
Manual.)
– <2-Sided Orig. Orientation Set.>: Scans two-
sided originals for sending. (See "Scan, " in the
e-Manual.)
– <Delayed TX Settings>: Specifies the
transmission time. (See "Scan, " in the e-
Manual.)
– <Send Document Name Settings>: Sets the
name of the document for sending. (See
"Scan, " in the e-Manual.)
–
<Subject/Message Settings>: Sets the
message body text. (See "Scan, " in the e-
Manual.)
– <Register Favorites>: Stores frequently used
send settings for future use. (See "Scan, " in the
e-Manual.)
8-6
7
Press (Start).
– Scanning starts if the original is placed in the
feeder, and the scanned data is sent to the
specified destination when scanning is
complete.
– To cancel scanning, press the left Any key to
select <Cancel> or press
8
Use [▼], [▲] or
the original size, then press [OK].
9
Press (Start).
(Stop).
(Scroll Wheel) to select