Canon Color imageCLASS MF8450c Basic Operation Manual page 266

■ If you select a log in which a destination is
stored:
The Send Settings screen appears.
① Confirm the settings.
■ If you select a log in which a destination is
not stored:
The Select Send Type screen appears.
① Specify a destination.
For details about how to specify destinations, see
"Specifying Destinations, " on p. 5-30.
6
Press (Start).
– Scanning starts if the original is placed in the
feeder, and the scanned data is sent to the
specified destination when scanning is
complete.
– To cancel scanning, press the left Any key to
select <Cancel> or press
7
Use [▼], [▲] or
the original size, then press [OK].
8
Press (Start).
Job Recall
(Stop).
(Scroll Wheel) to select
5-65