Canon Color imageCLASS MF8450c Basic Operation Manual page 175

Erasing Shadows/Lines
6
Use [▼], [▲] or
the original size, then press [OK].
To switch to the A/B Sizes, press the left Any key
to select <A/B Sizes>.
7
Enter the each erase width value:
■ If you want to specify the erase width
value for center:
① Use [▼], [▲] or
<Center>, then press [OK].
To enter values in millimeters, press the left Any
key to select <Enter mm>.
4-46
(Scroll Wheel) to select
(Scroll Wheel) to select
② Use [▼], [▲] or
(Scroll Wheel) to enter a
frame erase width value, then press [OK].
– The default setting is <3/8" (10 mm)>. The
maximum original frame erase width that you
can set is <1 15/16" (50 mm)>.
– When entering the value in millimeters, you
can also use [▼], [▲],
– (numeric keys).
– If you want to change the value, press
(Clear) before entering the new value.
– If you enter a value outside the setting range, a
message prompting you to enter an
appropriate value appears on the screen.
■ If you want to specify the erase width
value for all sides:
① Use [▼], [▲] or
(Scroll Wheel) to select
<All Sides>, then press [OK].
(Scroll Wheel), or