Canon Color imageCLASS MF8450c Basic Operation Manual page 241

Specifying Destinations
6
Repeat step 4 and 5 until all the
destinations are set.
– Only one new destination can be specified. If
you add destinations, specify them from
Address Book.
– You cannot specify the detail settings for each
destination.
7
Press (Start).
– Scanning starts if the original is placed in the
feeder, and the scanned data is sent to the
specified destination when scanning is
complete.
– To cancel scanning, press the left Any key to
select <Cancel> or press
8
Use [▼], [▲] or
the original size, then press [OK].
5-40
(Stop).
(Scroll Wheel) to select
9
Press (Start).
10
Follow the instructions on the display,
then press (Start) once for each
original.
11
When scanning is complete, press the
right Any key to select <Done>.
– Scanning starts, and the scanned data is sent
to the specified destination when scanning is
complete.
– To cancel scanning, press the left Any key to
select <Cancel> or press (Stop).