ECM Transmission
ECM (Error Correction Mode) is a mode that automatically detects and corrects fax
transmission errors resulting from telephone line noise. ECM reduces errors when sending
faxes in a poor telephone line condition.
The default setting is <On>.
–
To communicate using ECM, make sure this mode is activated in both the sending and receiving machines. ECM
transmissions are possible only when this mode is activated in both machines.
–
Even when ECM is activated, errors can sometimes occur due to a poor telephone line connection.
–
If there is trouble with the line, it will take more time to send the documents.
1
Press
(Main Menu).
2
Press the right Any key to select
<Additional Func.>.
3
Use [▼], [▲] or
<Communications Settings>, then press
[OK].
(Scroll Wheel) to select
4
Use [▼], [▲] or
<Fax Settings>, then press [OK].
5
Use [▼], [▲] or
<TX Settings>, then press [OK].
ECM Transmission
(Scroll Wheel) to select
(Scroll Wheel) to select
5-67