Canon Color imageCLASS MF8450c Basic Operation Manual page 451

Error Messages
Message
Replace the toner cartridge.
Return page 1 to the top, and then
press the Start key.
Set the correct paper.
Set the IP Address.
The counter has reached the set
value.
12-28
Description
Printing is not possible because the
toner has run out.
Scanning was stopped due to a
problem with the feeder.
– The paper size is not appropriate
for printing a report or list.
– The paper ran out while printing a
received document, report or list.
This machine is not set with an IP
address.
You cannot print because the set
page limit for either scans, prints,
or copies in the department ID
management function has been
reached.
Action
Replace the toner cartridge. (See
"Replacing the Toner Cartridges," on
p. 11-7.)
Arrange the originals in page order with
the first page on top. Place the originals
back into the feeder's original supply
tray, and press (Start).
– Set the paper size to <LTR>, <LGL>,
<STMT>, <EXEC>, <FLSC>,<OFI>, <B-
OFI>, <M-OFI>, <G-LTRR>, <G-LGL> or
<Custom Size>, and then load paper
of the same size.
– Load paper in the paper drawer or
stack bypass tray.
Specify the IP Address Settings in
TCP/IP Settings in Network Settings
in System Management Set (from the
Additional Functions screen), then turn
the machine's main power OFF and
back ON again. (See "Network Settings,"
or "Setting Up the Machine," in the e-
Manual.
Contact your system manager.