Canon Color imageCLASS MF8450c Basic Operation Manual page 117

Storing/Editing One-Touch
■ If you select <FTP> or <Windows (SMB)>:
① Use [▼], [▲] or
<Host Name>, then press [OK].
② Use the software keyboard to enter the host
name.
– You can enter up to 120 characters for the
host name.
– For information on how to use the software
keyboard, see "Entering Characters, " on p. 1-19.
A host name is a unique name assigned to
identify each host computer that provides
services on the Internet. In this entry box, enter
the name of the file server on the network as the
destination of the send job.
3-40
(Scroll Wheel) to select
③ If you are finished, press the right Any key
to select <Set>.
④ Use [▼], [▲] or
(Scroll Wheel) to select
<Folder Path>, then press [OK].
⑤ Use the software keyboard to enter the
path to the folder.
– You can enter up to 128 characters for the
folder path.
– For information on how to use the software
keyboard, see "Entering Characters, " on p. 1-19.
– A file path is a series of characters that signify
the location of the folder. Specify a folder in the
file server as the destination of the send job.
– If you are sending to an imageWARE Document
Manager folder, enter the folder name set in
imageWARE Gateway (Color imageCLASS
MF9170c/9150c only).