Basic Copying Method
Basic Copying Method
This section describes the basic procedure for copying.
1
Place originals on the platen glass or load
it them in the feeder.
–
For details, see "Placing Originals, " on p. 2-4.
–
Close the feeder after placing your originals.
–
For originals you can copy, see "Originals
Requirements, " on p. 2-2.
2
Press
3
Use [▼], [▲] or
<Copy>, then press [OK].
4-4
(Main Menu).
(Scroll Wheel) to select
4
Make the copy settings you require.
You can specify the following settings:
–
<Color Mode Settings>: Specifies the color or
B&W. (See "Selecting Color Mode, " on p. 4-7.)
–
<Paper Source Settings>: Specifies the paper
source. (See "Selecting Paper Source, " on p. 4-
9.)
–
<Density/Background Rem. Set.>: Adjusts the
density and the background color of originals.
(See "Adjusting Density, " on p. 4-17)
–
<Various 2-Sided Settings>: Makes two-sided
copies. (See "2-Sided Copying, " on p. 4-22.)
–
<Copy Ratio Settings>: Adjusts the size by
enlarging/reducing original images. (See
"Enlarge/Reduce Images, " on p. 4-30.)
–
<Original Image Quality Settings>: Specifies
the image type of originals. (See "Selecting
Image Quality, " on p. 4-34.)
–
<Copy Multiple Pages onto 1 Page>: Reduces
multiple originals to fit on one sheet of paper.
(See "Multiple Originals onto One Sheet (N on
1), " on p. 4-36.)
–
<Sharpness Settings>: Adjusts the contrast of
the originals. (See "Adjusting Sharpness, " on
p. 4-39.)
–
<Shadow/Frame Erase Settings>: Erases
unnecessary shadows and lines. (See "Erasing
Shadows/Lines, " on p. 4-41.)
–
<Color Adjustment>: Adjusts the color
balance for the copy. (See "Adjusting Color
Balance, " on p. 4-51.)
–
<Finishing Settings>: Sorts copies into sets.
(See "Collating Copies, " on p. 4-57.)
Need help?
Do you have a question about the Color imageCLASS MF8450c and is the answer not in the manual?
Questions and answers