Selecting Paper Source; Copying On Papers In Drawers - Canon Color imageCLASS MF8450c Basic Operation Manual

Selecting Paper Source

You can manually specify a paper source.
The default setting is <Drawer1: LTR>.
– If you are copying an original with an image that extends all the way to the edges onto the same size paper at a copy ratio
of 100%, the periphery of the original image may be cut off slightly on the copy. For details, see "Scanning Area, " on p. 11-4.
– The suffix <R> (such as in STMTR), used in paper size designations, indicates that the paper is loaded in a paper drawer or
the stack bypass tray horizontally.

Copying on Papers in Drawers

You can select paper drawer 1 or 2 (optional) for a copy. You need to set up the paper size and type for each
drawer in advance. For details about configuring the paper size and type, see "Setting Paper Size and Type, " on
p. 2-20.
1
Set originals.
For details, see "Placing Originals, " on p. 2-4.
2
Press (Main Menu).
3
Use [▼], [▲] or
<Copy>, then press [OK].
4
Use [▼], [▲] or
display <Paper Source Settings>, then
press [OK].
Selecting Paper Source
(Scroll Wheel) to select
(Scroll Wheel) to
4-9