Erasing Addresses Registered In One-Touch - Canon Color imageCLASS MF8450c Basic Operation Manual

Storing/Editing One-Touch

Erasing Addresses Registered in One-Touch

This section describes the procedure for erasing addresses registered in one-touch.
This section describes how to erase one-touch destinations from the Additional Functions screen. You can also erase them from the
Select Send Type screen, as follows:
– In the Select Send Type screen, press the right Any key to select <One-touch>.
– Use [▼], [▲] or (Scroll Wheel) to select the one-touch you want to erase.
– Press the left Any key to select <Reg/Edit/Erase>.
– Use [▼], [▲] or (Scroll Wheel) to select <Erase from One-touch>, then press [OK].
– Follow the procedure described in this section from step 7.
1
Press
2
Press the right Any key to select
<Additional Func.>.
3
Use [▼], [▲] or
<Address Book Settings>, then press [OK].
If a password has been set for the Address Book,
enter the password to enter Address Book
Settings menu. Enter the password using
(numeric keys), then press [OK]. (For details
about the Address Book password, see "Security, "
in the e-Manual.)
3-50
(Main Menu).
(Scroll Wheel) to select
4
Use [▼], [▲] or
<Register One-touch>, then press [OK].
5
Use [▼], [▲] or
the one-touch you want to erase, then
press [OK].
– You cannot erase multiple one-touch
destinations at the same time.
– If the desired one-touch is not displayed, use
–
[▼], [▲] or
desired one-touch.
(Scroll Wheel) to select
(Scroll Wheel) to select
(Scroll Wheel) to scroll to the