Canon Color imageCLASS MF8450c Basic Operation Manual page 116

11
Use the software keyboard to enter the
one-touch name.
– You can enter up to 12 characters for the one-
touch name.
– For information on how to use the software
keyboard, see "Entering Characters, " on p. 1-19.
12
If you are finished, press the right Any key
to select <Set>.
13
Use [▼], [▲] or
<Destination Registration>, then press
[OK].
(Scroll Wheel) to select
14
Use [▼], [▲] or
a server protocol, then press [OK].
– <FTP>: Select this protocol if you are sending
documents to a computer running Sun Solaris
2.6 or later, Mac OS X, Internet Information
Services 5.0 on Windows 2000 Server, Internet
Information Services 5.1 on Windows XP
Professional, Internet Information Services 6.0
on Windows Server 2003, Internet Information
Services 7.0 on Windows Vista, or Red Hat
Linux 7.2.
– <Windows (SMB)>: Select this protocol if you
are sending documents to a computer
running UNIX/Linux (Samba 2.2.8a or later) or
Windows 98/Me/2000/XP/Server 2003/Vista.
– <Windows (SMB): Browse>: Select this
protocol if you want to specify a file server
connected to a specific network.
After turning the main power on, you must wait
for the time set in the Startup Time Settings to
elapse before selecting <Windows (SMB):
Browse>. Network transmission is not possible
until this startup time has elapsed. (See "Network
Settings, " in the e-Manual.)
Storing/Editing One-Touch
(Scroll Wheel) to select
3-39