Canon Color imageCLASS MF8450c Basic Operation Manual page 81

Storing/Editing Address Book
9
If you are finished, press the right Any key
to select <Set>.
10
Use [▼], [▲] or
<Destination Registration>, then press
[OK].
11
Use –
number.
– You can enter up to 120 characters for fax
number.
– If you want to move the position of the cursor,
use [▼], [▲] or
– If you want to delete the number or character
immediately to the left of the cursor, use [▼],
[▲] or
<Backspace>, then press [OK].
3-4
(Scroll Wheel) to select
(numeric keys) to enter the fax
(Scroll Wheel).
(Scroll Wheel) to select
– If you want to insert a pause of several
seconds, use [▼], [▲] or
select <Pause>, then press [OK]. If you insert a
pause within the fax number, the letter <p> is
displayed between the numbers. If you insert
a pause at the end of the fax number, the
letter <P> appears. When dialing an overseas
number, insert a pause after the country code,
and at the end of the fax number.
–
If you want to directly call an extension line
that is connected to a PBX (Private Branch
Exchange), which accepts only tone signals,
use [▼], [▲] or (Scroll Wheel) to select
<Tone>, then press [OK].
– If you want to insert a space between
numbers, use [▼], [▲] or
select <Space>, then press [OK].
– If you want to delete the entire number you
entered, press (Clear).
– For information on how to set the length of a
pause, see "Communications Settings, " on
p. 13-8.
– For information on how to insert a pause for an
overseas number, see "Dialing an Overseas
Number (With Pauses), " on p. 5-22.
– You cannot insert a pause or a space at the
beginning of a number.
– If you enter a pause at the end of the number,
the pause is always 10 seconds long.
(Scroll Wheel) to
(Scroll Wheel) to