Canon Color imageCLASS MF8450c Basic Operation Manual page 232

4
Enter a fax number using
(numeric keys).
You can enter up to 120 characters for the fax
number.
Details of each item are shown below.
– <Set Destination>: Set the desired
destination.
– <Backspace>: Delete the last number entered.
– <Pause>: Insert a pause of several seconds in
the fax number you are dialing. If you insert a
pause within the fax number, the letter <p> is
displayed between the numbers. If you insert
a pause at the end of the fax number, the
letter <P> appears.
When dialing an overseas number, insert a
pause after the country code and at the end
of the fax number. (See "Dialing an Overseas
Number (With Pauses), " on p. 5-22.)
– <Tone>: Select when you want to directly call
an extension line that is connected to a PBX
(Private Branch Exchange), which accepts only
tone signals. If you select <Tone> and press
[OK], the letter <T> appears.
– <Direct Send>: Send documents directly to
the recipient. Select <On>, then press [OK]. If
you do not select direct sending mode,
memory sending mode is used. (See "Direct
Sending, " on p. 5-52.)
– <Hook>: Send a fax document manually or
use tone dialing. (See "Calling the Recipient
before Sending Fax Documents (Manual
Sending), " on p. 5-19, or "Switching
Temporarily to Tone Dialing, " on p. 5-21.)
– , and
5
– You cannot insert a pause at the beginning of a
number.
– If you enter a pause at the end of the number,
the pause is always 10 seconds long.
– You can press (Clear) to clear your entry.
– If <Confirm Entered Fax No.> in <Restrict the
Send Function> in <System Management Set.>
under <Additional Func.> is set to <On>, you
should enter the fax number again for
confirmation. Enter the fax number you
entered in step 4, then press [OK]. (See
"Security, " in the e-Manual.)
Use [▼] , [▲] or (Scroll Wheel) to
select <Set Destination>, then press [OK].
■ If you want to clear the specified
destination:
① Press the left Any key to select <Confirm/
Erase>.
Specifying Destinations
5-31