Power Supply - Canon Color imageCLASS MF8450c Basic Operation Manual

To ensure reliable operation of the machine and to protect it from overheating (which can cause it to
–
operate abnormally and create a fire risk), do not block the exhaust vent. Never block or cover any openings
on the machine by placing it on a bed, sofa, rug, or other similar surface. Do not place the machine in a
cupboard or built-in installation, or near a radiator or other heat source unless proper ventilation is
provided. Leave at least 4" (100 mm) around all sides of the machine.
Do not stack boxes or furniture around the power outlet. Keep the area free so you can reach the outlet
–
quickly. If you notice anything unusual (smoke, strange odors, noises) around the machine, unplug the
power cord immediately. Contact Canon Customer Care Center.
Do not allow anything to rest on the power cord, and do not place the machine where the cord will be
–
walked on. Make sure the cord is not knotted or kinked.

Power Supply

– During electrical storms, turn off the main power switch and unplug the power cord from the power outlet.
(Please note that any data stored in the memory, including received fax documents, will be deleted about
60 minutes after you turn off the main power switch or unplug the power cord.)
– Whenever you turn off the main power switch, wait at least five seconds before you turn it on again.
Do not plug the power cord into an uninterruptible power supply (UPS).
–
This product emits low level magnetic flux. If you use a cardiac pacemaker and feel abnormalities, please move away from this product
and consult your doctor.
Preface
x